Mud-club

Vehicle & Technical => Range Rover => Topic started by: carls200tdi on August 28, 2014, 17:50:15

Title: Range rover p38 4.6 turns overbut wont start
Post by: carls200tdi on August 28, 2014, 17:50:15
Ok as per my previous post it wouldn't turn over.
Now got it turning over and it started with no problems left it a short while and it turned over but wont start play with the remote locking/unlocking doors and it will start after a bit of messing about anybody got any ideas what could be wrong
Title: Re: Range rover p38 4.6 turns overbut wont start
Post by: Range Rover Blues on August 30, 2014, 02:31:53
Many, many things that may have nothing to do with the central locking.   havn't tread your previous thread but just as a try and see, if you unplug the MAF sensor the ECU defaults to a basic setting, I had a faulty MAF on a V8 once and it wouldn't start, even though in closed loop it ignores thr MAF once it's running it needs it to start, so it started ok without it and ran well enough to get home.

Beyond that I'd be ok with a set of meters and test lamps looking for electrical gremlins, as always it's easier to diagnose when you can get your hands on it.
Title: Re: Range rover p38 4.6 turns overbut wont start
Post by: carls200tdi on September 02, 2014, 18:06:48
All sorted now the fuel pump relay was playing up changed it and starts first time now
SimplePortal 2.3.5 © 2008-2012, SimplePortal