Mud-club

Vehicle & Technical => Range Rover => Topic started by: Dannyboy on December 04, 2011, 16:26:06

Title: fit 200tdi engine and gearbox into a classic two door ?
Post by: Dannyboy on December 04, 2011, 16:26:06
hi folks fitting a 200tdi engine and gearbox from a discovery into my bobtail  can anyone tell which gearbox mountings i need to get for gearbox to fit to chassis please or anywhere i can look at one on the web cheers folks
Title: Re: fit 200tdi engine and gearbox into a classic two door ?
Post by: simdeb on December 05, 2011, 22:38:02
You will need disco gear box mounts all holes are already in chassis as for the engine i cuts some out of a disco and fitted them

Simon 
Title: Re: fit 200tdi engine and gearbox into a classic two door ?
Post by: Range Rover Blues on December 19, 2011, 01:40:50
You'll need a chunk of Disco floor too to clear the gearbox IIRC.
Title: Re: fit 200tdi engine and gearbox into a classic two door ?
Post by: squaddie_fox on December 23, 2011, 23:14:19
You will need an lt77 long stick or you need to modify the transmission tunnel.
SimplePortal 2.3.5 © 2008-2012, SimplePortal