Mud-club

Vehicle & Technical => Discovery => Topic started by: les baty on July 07, 2009, 20:25:34

Title: discovery 300 tdi key fobs
Post by: les baty on July 07, 2009, 20:25:34
hi all, does anyone know how to program the remote key fobs as a mates has packed up. many thanks
Title: Re: discovery 300 tdi key fobs
Post by: Range Rover Blues on July 07, 2009, 22:42:07
1 button or 2 button?

1 button you can do, 2 button I think you need a diagnostic system.
Title: Re: discovery 300 tdi key fobs
Post by: les baty on July 07, 2009, 23:07:33
hi, it is the 2 button variety!!

cheers for that.
Title: Re: discovery 300 tdi key fobs
Post by: Porny on July 08, 2009, 07:19:28
I can program them.....  ;)

Only a very short drive away from Tamworth.


Ian
Title: Re: discovery 300 tdi key fobs
Post by: beast5680 on July 08, 2009, 18:36:46
not just a flat battery in the fob? mine packed up at the weekend completly, changed the battery and its all working now
Title: Re: discovery 300 tdi key fobs
Post by: Disco Matt on July 09, 2009, 11:10:41
If it's the two button type and it was originally with the car (rather than a replacement, which would need coding professionally) then you should be able to get it working again if you replace the battery, hold it near the car, and press the "lock" button repeatedly until the indicators flash.

These remotes have a number of codes that they cycle through to confuse anyone attempting to intercept the code. This is why you sometimes can't unlock the car straight away - the button was pressed in your pocket causing the car and remote to go out of synch.
SimplePortal 2.3.5 © 2008-2012, SimplePortal