Mud-club

Vehicle & Technical => Discovery => Topic started by: Range Rover Blues on May 28, 2013, 01:24:46

Title: 300Tdi oil seal
Post by: Range Rover Blues on May 28, 2013, 01:24:46
Guess what, I've been working on the TDi this week.  Yet another problem......

The front oil seal appears to be the later metal type with it's own seal journal rather than the traditional hard rubber type we all know and love.

When I fitted a new crank pulley (Bearmach) with the thicker flanges that are cast on, the oil seal tightened up and with the crank pulley bolted on it seized the crank.

Anyone else had this? the later metal type oil seal looks to have damaged the journal on the pulley so I might have to swap that now.
Title: Re: 300Tdi oil seal
Post by: lambert on May 28, 2013, 20:33:58
Can't say i have as even though mine is one of the last ones it is a rubber type seal.
Title: Re: 300Tdi oil seal
Post by: Range Rover Blues on June 23, 2013, 02:43:51
I fitted a spare pulley along with a rubber seal and checked it for clearance, it's just got enough space round it with the rubber one so all is hunky-dory.   Can't imagine why someone fitted the metal type seal, it's obvioulsy thicker an doesn't work. what's worse it was probably doen when the belt was last replaced along with the timing belt kit.

At least it's done properly now.
SimplePortal 2.3.5 © 2008-2012, SimplePortal