AuthorTopic: Original Fan  (Read 3656 times)

0 Members and 1 Guest are viewing this topic.

Offline Skcollob

  • Posts: 5
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Original Fan
« on: January 17, 2004, 04:34:06 »
I have recently brought an old 2.25L petrol 90, it is fitted with an electric fan and the cowling from the radiator to the engine has been removed.

However the original fan is still in place, can this be removed.   I have been told that if I take it off I need to replace it with a spacer..?

Tony.

Offline matthew

  • Posts: 494
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Original Fan
« Reply #1 on: January 18, 2004, 02:49:37 »
Almost certainly, if it is anything like the series 2.25 fan or the 2.5 as fited to my 88" then you just unbolt it from the end of the water pump shaft and that's it.

I've been known to take the fan blades off my 88" before venturing into deep water and replace after, so it's not a big job.
Cheers

Matthew
1958 Ser II  88" 1962 Ser IIa 109" 1962 Ser IIa 109" Dormobile
www.buryautoclub.co.uk | www.torquebac.co.uk | www.oldlandrovers.co.uk | www.oldroads.co.uk | http://lancsglass.oldroads.co.uk

Offline Skcollob

  • Posts: 5
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Original Fan
« Reply #2 on: January 24, 2004, 07:38:22 »
Thanks. Will give it a go.

Tony

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal