AuthorTopic: jacking up a L322  (Read 12069 times)

0 Members and 1 Guest are viewing this topic.

GORDON N

  • Guest
jacking up a L322
« on: July 19, 2012, 19:04:58 »
hi, a work mate has got a L322 and when he jacks it up as per handbook the body lifts but he can't get the jack to go high enough to lift wheels clear of the ground with either the jack that comes with the car or a trolley jack is there a way of lifting so wheels come of the ground without using a 4 post lift

cheers gordon

Offline Dr Neil

  • Posts: 818
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: jacking up a L322
« Reply #1 on: July 19, 2012, 20:42:16 »
If you have a trolley jack just put it under the axle the side you want to lift and jack away.
200tdi over 200kmiles
+2"lift.
Procomp Es9000 shocks
235 MT's on silver modulars
diff guards
tank guard
Paidia4x4 winch bumper.
Discoparts HD rear bumper.
Champion 10000N winch
CB and CDplayer
Safari snorkel
modified turbo actuator vac pipe pick up.
twin batteries with Paidia4x4 split charge system
roof lightbar

GORDON N

  • Guest
Re: jacking up a L322
« Reply #2 on: July 19, 2012, 21:00:45 »
cheers will let him know tomorrow

Offline Thrasher

  • Administrator
  • *****
  • Posts: 3102
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +7/-0
    • Northampton
  • Referrals: 0
Re: jacking up a L322
« Reply #3 on: July 19, 2012, 21:14:07 »
Er....the standard jack works fine, make sure he has followed the instructions. Keys NOT in the ignition, low range selected, wheels chocked and straight.....
--
Neil

GORDON N

  • Guest
Re: jacking up a L322
« Reply #4 on: July 19, 2012, 21:17:09 »
you can also strap the axle to a rigid place that can take the load so that the springs are held static.  Use ratchet straps.

cheers for that i will let him know

GORDON N

  • Guest
Re: jacking up a L322
« Reply #5 on: July 19, 2012, 21:22:29 »
Er....the standard jack works fine, make sure he has followed the instructions. Keys NOT in the ignition, low range selected, wheels chocked and straight.....
hi, he did that and the jack give way as it was at its limit and wheels were still on ground. i will let him know cheers for the help

Offline Thrasher

  • Administrator
  • *****
  • Posts: 3102
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +7/-0
    • Northampton
  • Referrals: 0
Re: jacking up a L322
« Reply #6 on: July 19, 2012, 21:23:37 »
Not being funny, but it's independent suspension, I've owned 4 L322's and NEVER had a problem jacking them up with the standard jack, using the correct procedure as per the manual. Don't strap it up and it's not recommended to use a trolley jack unless you know exactly where to jack.
--
Neil

GORDON N

  • Guest
Re: jacking up a L322
« Reply #7 on: July 19, 2012, 21:30:47 »
thats ok, where is the best place to jack from using a trolley jack as the standard one is knacked after the collapse

Offline Thrasher

  • Administrator
  • *****
  • Posts: 3102
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +7/-0
    • Northampton
  • Referrals: 0
Re: jacking up a L322
« Reply #8 on: July 19, 2012, 21:38:14 »
If you look under the struts, you should be able to see somewhere the trolley 'cup' will seat, but be aware that you are jacking the car in a way it is not expecting - by compressing the suspension. Ensure the keys are out of the vehicle and it is on level ground, otherwise it WILL attempt to compensate.
--
Neil

GORDON N

  • Guest
Re: jacking up a L322
« Reply #9 on: July 19, 2012, 21:39:55 »
cheers for that will pass on tomorrow

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal