AuthorTopic: 300tdi auto to manual conversion  (Read 4818 times)

0 Members and 1 Guest are viewing this topic.

mattyme

  • Guest
300tdi auto to manual conversion
« on: March 11, 2012, 14:04:31 »
im contemplating converting to a manual box... any tips or pitfalls to look out for?

also.... anyone got a manual box for sale!!? lol

Offline mroxo

  • Posts: 51
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Bedford
  • Referrals: 1
Re: 300tdi auto to manual conversion
« Reply #1 on: March 11, 2012, 21:55:33 »
I am contemplating a manual to auto conversion.
You will need the engine backplate as they differ from auto and manual.
Obviously clutch and master/slave cylinders, flywheel, pedal box and gubbins.
Gearbox and crossmember. An engine hoist and jacks etc.
Theres a fair bit to do on the conversion but it can all be done by the competent DIY mechanic.
I have done one before and found it much easier to take the engine and box out in one and do the nut and bolt work on the deck.  In fact it was easier to do the peddal box with the engine out.
I love to get my landy down and dirty

mattyme

  • Guest
Re: 300tdi auto to manual conversion
« Reply #2 on: March 12, 2012, 20:22:55 »
im still undecided which way to go... my kickdown is stuck at the moment and the box would benefit form a recon.... but i dont know whether to convert it or not as i like the auto.
its fly by wire, will i have to change that too if i go for the manual conversion?
i could just get another auto box off ebay for 3 or 4 hundred, and a recon will be more like 5 or 6 hundred. obviously id change the box myself so there is no labour involved..... what to do!! lol

Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
Re: 300tdi auto to manual conversion
« Reply #3 on: March 12, 2012, 20:55:34 »
I imagine you would have to change the centre console too.
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

mattyme

  • Guest
Re: 300tdi auto to manual conversion
« Reply #4 on: March 12, 2012, 21:03:41 »
yeah, the centre console has a different sized hole for the gearstick/selector... not a biggy tho.

Offline ukmudmaster

  • Posts: 293
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Billericay Essex
  • Referrals: 0
Re: 300tdi auto to manual conversion
« Reply #5 on: March 13, 2012, 12:22:02 »
Hi, I have a 300 manual, have had a few bits off it and I am going to weigh in the rest, I do not have the time to strip it right out. The box is good, the springs to centre
the lever need replacing, but everything you need to convert is there. Some trim, cyl head, wings are are off, as is steering bars. Take the car is easiest, scrap value is 200 ish, its yours for that,
Dave
Range Rover Classic EFI auto, 3.9 V8 Offroader, 300 Tdi Auto greenlaner.
axledeep@googlemail.com

mattyme

  • Guest
Re: 300tdi auto to manual conversion
« Reply #6 on: March 13, 2012, 23:04:19 »
it would be an idea dude but your a long way away and i have nowhere to store the shell and strip it.

mattyme

  • Guest
Re: 300tdi auto to manual conversion
« Reply #7 on: March 22, 2012, 22:46:54 »
no longer contemplating a conversion.... ive had my auto box reconned!!

i like the auto!!! lol

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal