AuthorTopic: fit 200tdi engine and gearbox into a classic two door ?  (Read 1683 times)

0 Members and 1 Guest are viewing this topic.

Offline Dannyboy

  • Posts: 25
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • DANNYBOY UP TO HES TRICKS AGAIN
  • Referrals: 0
fit 200tdi engine and gearbox into a classic two door ?
« on: December 04, 2011, 16:26:06 »
hi folks fitting a 200tdi engine and gearbox from a discovery into my bobtail  can anyone tell which gearbox mountings i need to get for gearbox to fit to chassis please or anywhere i can look at one on the web cheers folks

Offline simdeb

  • Posts: 624
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: fit 200tdi engine and gearbox into a classic two door ?
« Reply #1 on: December 05, 2011, 22:38:02 »
You will need disco gear box mounts all holes are already in chassis as for the engine i cuts some out of a disco and fitted them

Simon 
North Nottinghamshire rep for GLASS

nottinghamshirenorth.rep@glass-uk.org

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15216
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: fit 200tdi engine and gearbox into a classic two door ?
« Reply #2 on: December 19, 2011, 01:40:50 »
You'll need a chunk of Disco floor too to clear the gearbox IIRC.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline squaddie_fox

  • Posts: 386
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: fit 200tdi engine and gearbox into a classic two door ?
« Reply #3 on: December 23, 2011, 23:14:19 »
You will need an lt77 long stick or you need to modify the transmission tunnel.

235/85 special tracks, 3.9 V8, HD bumpers, +3 inch lift, +5 shocks f&r, 12000lbs champion winch, heavy duty steering bars, CB and a snorkel....