AuthorTopic: 110 rear spring seats on to an RRC  (Read 1842 times)

0 Members and 1 Guest are viewing this topic.

Offline dod51e

  • Posts: 240
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
110 rear spring seats on to an RRC
« on: December 01, 2010, 17:12:55 »
Apart from the obvious of cutting the old hanger off the chassis and welding the new 110 part (LR540B) on are there any other problems in making this swap; i.e. is the chassis on a 110 deeper than on a Range Rover?

I have a need to fit 110 rear springs to cope with the weight.

Anyone done this modification before?

Cheers

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
Re: 110 rear spring seats on to an RRC
« Reply #1 on: December 01, 2010, 19:37:15 »
Apart from the obvious of cutting the old hanger off the chassis and welding the new 110 part (LR540B) on are there any other problems in making this swap; i.e. is the chassis on a 110 deeper than on a Range Rover?
I have a need to fit 110 rear springs to cope with the weight.
Anyone done this modification before?
Does anyone have a better than working knowledge of Land Rover springs as I have a weight and height issue with the Classic and don't want to go down the aftermarket Spring Route again.
I'd personally bin the 110 rear springs idea. Cutting, welding, fitting new spring seats on the axles, more springs.  There might be clearance issues with your tyre on the spring seat depending on set up, there might be issues at the axle end too with the larger diameter spring seat.
Why not just fit some heavy duty standard height springs?
If you've got loads of weight on, Police spec red & whites might fix it too?
What's making your car so heavy?

 :D
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

Offline trecfive

  • Posts: 457
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • If it fit's the hook it'll pull it.
    • Nuneaton
  • Referrals: 0
Re: 110 rear spring seats on to an RRC
« Reply #2 on: December 01, 2010, 19:42:38 »
Put airbags on the rear,you can carry what you want by upping or lowering the pressure,to maintain the desired ride height.
1. Range Rover Classic 300tdi SE Auto Softdash
2. Range Rover Classic 300tdi SE Auto Softdash, apparently very rare.

Offline Bowie

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 110 rear spring seats on to an RRC
« Reply #3 on: December 02, 2010, 14:19:26 »
Strictly speaking, you could be looking at an IVA as would would have modified the chassis from standard.

Really not worth it, just put some air bags in there and job done :)
1980 SIII Lightweight 2.25 Petrol - completely standard.
1991 Range Rover Vogue SE 3.9 V8 - now on LPG (sorted!), 2" lift, mud tyres, and more to come...

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: 110 rear spring seats on to an RRC
« Reply #4 on: December 02, 2010, 17:44:24 »
Another problem you might encounter is that the manufacturer's chassi plate states the max vehicle weight.  this is legally enforceable!

Look at some Disco H/D rear springs, the Diusco had a higher MAM and no self leveller, so the springs are tougher.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal