AuthorTopic: Stuff For Swapping Engine  (Read 5516 times)

0 Members and 1 Guest are viewing this topic.

Offline datalas

  • Administrator
  • *****
  • Posts: 2727
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Stuff For Swapping Engine
« on: January 02, 2004, 08:29:46 »
The next few weeks should see Petro reborn with a new (hopefully running properly) engine, so the question is this, asside from the engine (obviously) what parts are required to do the job properly....

Clutch Plate
Engine Mounts & Bolts
Oil
Plugs
Points
Sump Gasket
Oil Filter
A Stockpile of Teabags (to be used as a Tim pacification tool)
Clutch Fluid
Antifreeze

Anyone got anything else?

The gearbox is intended on staying where it is, since it's going to be a begger to get out, also swapping out the radiator bulkhead, but already have a new radiator fitted with new hoses & clips etc..
--


ChrisW

  • Guest
Stuff For Swapping Engine
« Reply #1 on: January 02, 2004, 11:27:02 »
Masking tape and a marker pen? That way you can tape up any cables/pipes disconnected and a note of where/what they are.

A cardboard box - to put all the little bits left over in!

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal