AuthorTopic: Parabolics done  (Read 2623 times)

0 Members and 1 Guest are viewing this topic.

Offline stevethedent

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Sobriety is an illusion caused by a lack of beer
  • Referrals: 0
Parabolics done
« on: March 20, 2010, 15:27:27 »
WOW WOW WOW What a difference!!! The ride on this Landy is so different. I am absolutely amazed at way this ser 3 handles the biggest speed humps. I now drive over them at 30 mph instead of having to slow down to a crawl so my spine stays in place. I have also had it on the hard & rocky and the black and slippery and it has made a big difference. The wheels seem to stay on the ground a lot more and the extra height and articulation is brilliant. I have not changed the shocks or brake pipes and Have not had a problem with either. I wish I had done this before now. Anyone out there who has old leaf springs and has thought of renewing them get them done I Guarantee you will be amazed. If anyone has any questions, please fire away. I had these supplied & fitted for less than £500 at Landranger services in Stockport. I recommend this garage to anyone in the Northwest They have the have a vast range of spares in store and are real enthusiasts themselves Unit 1 Sheffield street Stockport SK4 1RU Tel: 0161 474 0101 (Not a upthereownbutt main dealer)  :dance:
« Last Edit: March 23, 2010, 09:29:24 by stevethedent »

Offline Little-Green-Machine

  • Posts: 448
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Parabolics done
« Reply #1 on: March 20, 2010, 17:37:09 »
£500 to have a set of springs fitted? :shock:
1992 Defender 200 TDI
1995 Discovery 300 TDI
Both with mods, dents and scratches!

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Parabolics done
« Reply #2 on: March 20, 2010, 19:33:55 »
£500 to have a set of springs fitted? :shock:

That's what I thought.  :shock:

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Parabolics done
« Reply #3 on: March 20, 2010, 20:34:12 »
I could do 10 of these a day,god i would be rich. Thought robin hood was from Nottingham?????
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Parabolics done
« Reply #4 on: March 20, 2010, 21:54:51 »
What make of paras did you go for?
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

Offline stevethedent

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Sobriety is an illusion caused by a lack of beer
  • Referrals: 0
Re: Parabolics done
« Reply #5 on: March 21, 2010, 09:25:00 »
For those of you who thought this was expensive I have gone through the bill and I think you will find it fair. Firstly I said the bill was under £500 that was because I didn't have the bill to hand The accurate fig is £437 The springs pins, shackles, etc cost £269+vat  total £317 Which leaves the labour costs at about £100 +vat  which to spend a full day wresltling with 30 year old siezed pins & nuts and bolts etc is bloody good value for money. For the rivet counters out there all the figures are approx and have been rounded up to whole pounds so don't go looking for your calculater. The main thing is I am more than happy with the results.  :dance:

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Parabolics done
« Reply #6 on: March 21, 2010, 10:13:42 »
Parts and labour isn't so bad. If it was just for fitting, it'd be extortionate.


Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
Re: Parabolics done
« Reply #7 on: March 21, 2010, 10:58:42 »
how come you had to replace the shackles ?
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

Offline stevethedent

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Sobriety is an illusion caused by a lack of beer
  • Referrals: 0
Re: Parabolics done
« Reply #8 on: March 21, 2010, 13:37:40 »
Should have read shackle bushes, 30 years old and shot to s**t :lol:

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Parabolics done
« Reply #9 on: March 21, 2010, 18:11:08 »
well now you've said that it was an absolute bargain :D chassis bushes are a PITA.

Offline Little-Green-Machine

  • Posts: 448
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Parabolics done
« Reply #10 on: March 21, 2010, 21:04:57 »
thats not bad then, as hightower said what make you get  :D
1992 Defender 200 TDI
1995 Discovery 300 TDI
Both with mods, dents and scratches!

Offline stevethedent

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Sobriety is an illusion caused by a lack of beer
  • Referrals: 0
Re: Parabolics done
« Reply #11 on: March 22, 2010, 16:01:47 »
Me again, sorry I didn't see the post asking me what make the springs are until today.
The springs are made by GME springs in coventry who don't seem to deal direct with the public.
The springs can be ordered through Landranger services in stockport 0161 474 0101
or try your own local supplier. Do it you will not be disappointed. :dance:


P.S.......... Just posted some pics of the one piece screen I made. Go to the post headed one piece screen.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal