AuthorTopic: Cylinder head  (Read 1180 times)

0 Members and 1 Guest are viewing this topic.

Offline Delk

  • Posts: 11
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Cylinder head
« on: January 13, 2010, 12:59:12 »
Does anyone know if cylinder head ETC5412 has hardened seats already installed for unleaded fuel?

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Cylinder head
« Reply #1 on: January 13, 2010, 21:28:04 »
If its a 2.25 head i would say no unless it was an after market joby which i dont think there is a way to tell?
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Cylinder head
« Reply #2 on: January 13, 2010, 21:28:54 »
Just chuck some lead pellets in your tank,it will do the job!
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline TBM

  • Posts: 179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Cylinder head
« Reply #3 on: January 14, 2010, 16:16:48 »
I wouldn't worry about the unleaded unless you do a massive mileage.

I average about 20k a year, and have done for the last two years running on unleaded petrol and LPG (which is supposed to be worse) and haven't noticed any major problems with valve seat recession. Money I've saved on additives will more than cover the cost of an unleaded head when the need occurs.

However if it's a brand new head, I'd have it converted as it won't have any lead 'memory'. I heard people talk of conversion for around £150ish or you can get a more lively one from Turner or ACR for around £500. (I had a stage 2 head in a S3 109 at it would cruise happily at mid 70 and hit over 80 when needed. Much better for petrolheads like me who think diesel is the devils work).

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Cylinder head
« Reply #4 on: January 14, 2010, 21:13:11 »
I must be a double devil then! Does it still apply to veg oil users??
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal