AuthorTopic: series 2,swb,diff ratio??  (Read 2086 times)

0 Members and 1 Guest are viewing this topic.

Offline DAVE V8

  • Posts: 80
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
series 2,swb,diff ratio??
« on: November 23, 2009, 23:20:51 »
hi,broke the rear diff sunday,play day,just taken it out 46 teeth  and 13 on the pinion ,planet gears all breaking up,am i right that this is a 3.5 diff,also what vehicle will i be able to get one from,is it disco ,range rover.??any advise appreciated,hoping to fix for sunday to go to whaddon,cheers dave..

Offline maggers

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: series 2,swb,diff ratio??
« Reply #1 on: November 27, 2009, 21:19:57 »
Hi, If it is a 3.54 then one from an early Discovery/RRC will fit, just check the number of driveshaft splines is the same. :D
'93 Discovery 200TDI

Offline NiteMare

  • Posts: 177
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Birmingham by The Fort
    • Birmingham by The Fort
  • Referrals: 0
Re: series 2,swb,diff ratio??
« Reply #2 on: November 29, 2009, 00:09:51 »
if you use a disco diff then you'll have to refill the oil thru the end of the axle tube if there's no filler plug in the diff pan, just jack the axle high one side and pull the halfshaft to fill a measured amount
it ain't broke ...

i ain't fixed it enough

Offline tack43

  • Posts: 351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Worcs, Redditch
  • Referrals: 0
Re: series 2,swb,diff ratio??
« Reply #3 on: November 29, 2009, 21:35:08 »
90/110 10 spline will fit as well.

Rich
Rich

1985 90 300TDI "Defender" SOLD.
1990 RRC 3.9 Vogue LPG
1991 RRC 3.9 Vogue SE "The spare parts box!" Broken for spares
1993 RRC Off-roader. No engine. Yet!
1991 RRC 3.9 Vogue SE "Tempory off-roader" Failed MOT - More spare parts
1992 RRC 3.9 Vogue SE "New tempory off-roader" SOLD

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: series 2,swb,diff ratio??
« Reply #4 on: December 24, 2009, 18:23:11 »
if you use a disco diff then you'll have to refill the oil thru the end of the axle tube if there's no filler plug in the diff pan, just jack the axle high one side and pull the halfshaft to fill a measured amount

Depending what yearof RRC you get, they either had fillers in the diff casing or the axle casing, diff casing are earlier and IIRC the imperial diff, the platform for the plug hole is still cast on later diffs but not used.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: series 2,swb,diff ratio??
« Reply #5 on: December 24, 2009, 18:43:07 »
I  have an early 3.5 with a filler if you want to buy her?
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal