AuthorTopic: 10 to 24 spline axle  (Read 1287 times)

0 Members and 1 Guest are viewing this topic.

Offline Disco-andy

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
10 to 24 spline axle
« on: September 06, 2009, 20:37:29 »
I have recently put a 24 spline disco rear axle on my 200tdi 90 and all is good.

I am now looking at the fount , i have 2 spare fount axles and will need swivels from both to make make up one good axle.

my resent idea being could i build the diff, shafts and ends from the 24 spline (abs) axle on to the original 1991 10 spline case?

The original case is in good condition, and it would be nice to avoid taking the front shocks out!

andy

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: 10 to 24 spline axle
« Reply #1 on: September 06, 2009, 20:55:41 »
Just do it then!
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline Disco-andy

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 10 to 24 spline axle
« Reply #2 on: September 06, 2009, 21:01:40 »
Would they fit? I kind of for got to say it was just an idea I didn't know ifit would work.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: 10 to 24 spline axle
« Reply #3 on: September 07, 2009, 20:41:49 »
Should do,only about 2 hour job.
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline Disco-andy

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 10 to 24 spline axle
« Reply #4 on: September 08, 2009, 17:12:29 »
thanks ill put in an order for a load of  seals, as it needs to be done for the mot on the 28th.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal