Pages: [1]   Go Down

AuthorTopic: Light switch  (Read 1399 times)

0 Members and 1 Guest are viewing this topic.

Offline dave_2A_2.25Turbo

  • Posts: 811
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Light switch
« on: August 12, 2009, 19:40:10 »
Hi
Can anyone tell me what wires go where on a Series 3 light switch?
The lights themselves work OK, but the dashlights come on with the sidelights, but go off when you go to dip/main.  Got to be a wire in the wrong place...
Logged
Dave
1963 S2A
1992 Disco 200TDi
Sankey Widetrack

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Light switch
« Reply #1 on: August 12, 2009, 21:01:47 »
just take the wire off and try it on another terminal.
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline dave_2A_2.25Turbo

  • Posts: 811
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light switch
« Reply #2 on: August 12, 2009, 21:56:46 »
Oooh! Never thought of that!  There's only  one spare term, & if I connect to that, the dash lights are on while the lights are off, and off when any of the lights are on.
Logged
Dave
1963 S2A
1992 Disco 200TDi
Sankey Widetrack

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Light switch
« Reply #3 on: August 13, 2009, 21:52:30 »
power of elimenation!
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light switch
« Reply #4 on: August 14, 2009, 10:04:21 »
should be the terminal on the top of the switch, the same one as side lights from what I remember.  Do your side lights go out with dip/main too?
Logged

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Light switch
« Reply #5 on: August 14, 2009, 16:06:50 »
side lights which feed dash lights stay on all the time because it also feeds ur rear lights! LOGIC
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline dave_2A_2.25Turbo

  • Posts: 811
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Light switch
« Reply #6 on: August 17, 2009, 08:36:18 »
Sorted.  The feed from the main light switch to the dashlight switch was knackered AND in the wrong place.  Note to self: always make sure the dashlight switch is in the ON position when tinkering...
Logged
Dave
1963 S2A
1992 Disco 200TDi
Sankey Widetrack
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal