AuthorTopic: which prop for lifted defender 2.4 tdci  (Read 8726 times)

0 Members and 1 Guest are viewing this topic.

Offline scatt

  • Posts: 162
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
which prop for lifted defender 2.4 tdci
« on: September 05, 2008, 20:35:02 »
Im having a bit of trouble with my defender 110 dcpu, its a 2.4 tdci with a +2 lift kit and castor corrected radius arms, cranked trailing arms etc. BUT im getting a nasty vibration at approx 40mph. I was advised to buy a wide yoke prop but this doesnt seem to have cured the problem. ive spoke to lots of people and looked at lots of forums but they all have there own idea. Im really confused and need some help. :?

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #1 on: September 05, 2008, 21:17:12 »
I'll be calling you back monday, just waiting for a reply from my man in LR  ;)
 :D
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #2 on: September 06, 2008, 00:18:43 »
Lifted with castor correction, I make no wonder you're getting a vibration (more accurately a pulsing in the drivetrain).

You need a Cardan jointed propshaft, that's one with a CV at the gearbox end.  The axle end is ok becasue with 3deg correction the bottom UJ is almost straight.

DO a search for threads about Cardan joints, it's a common topic.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline SteveG

  • Posts: 440
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #3 on: September 06, 2008, 09:42:32 »
The castor corrected arms make things worse and 9 times out ten are not necessary on a 2" lift. When you lifted your Defender you increased the working angle of the prop. By adding castor corrected arms you have now dropped the nose of the diff back down increasing the angle at the axle even more. These increased angles and the reason that the the UJ's are now wroking out of sync and this is causing the vibration.

Due to the prop angles of the latest PUMA engine and drivetrain the later Defenders suffer from this more than TD5's which in turn suffered more than TDi's.

The wide angle prop was really bad advice. This just stops it binding at maximum working angles and does nothing for the actual working angles of the prop.

As RRBlues has said, a Cardan joint will help to cancel out the angle differential and stop vibrations. A good custom one from the like of the propshaft clinic that is greaseable will cost about 230 pounds. Don't let anyone advise you to put a Discovery II one on.

Personally, I would take the castor adjusted front arms off and see what vibration is like. If it's gone and steering self centering is fine then I'd leave it at that before spending any more money. I'd also take the corrected arms back for a refund.

Unless you need the lift for bigger tyres, 34-35"+ there is no benefit in putting on a 2" lift and as you've found out it causes more problems. A 1" lift will work fine with tyres up to 35".

Cheers

Steve



Offline scatt

  • Posts: 162
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #4 on: September 06, 2008, 10:33:02 »
Thanks for some feed back guys, i ran it for a while without the castor arms because i hadnt bought any and it had a vibration then, BUT the front springs were being compressed more on one side than the other you could also see the dampers sitting a funny angle. So the castor cured that problem and made the steering feel LOADS better, obviously as i now know they have may be contributing towards the vibrations. I ve also been told not to fit disco 2 prop, this is what is causing me so much head ache. :cry:

Offline SteveG

  • Posts: 440
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #5 on: September 06, 2008, 17:43:49 »
The only reason for not fitting the Disco II cardan prop is that it's a sealed unit with no grease nipples. If you start to use it often off-road it lasts about a year. Hence it's a false economy going for the cheaper Disco II one.

Cheers

Steve

Offline thermidorthelobster

  • Posts: 3557
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #6 on: September 06, 2008, 17:52:40 »
The wide angle prop was really bad advice. This just stops it binding at maximum working angles and does nothing for the actual working angles of the prop.

Can somebody explain this a bit more?

Surely if it stops it binding at maximum working angles, then by definition the maximum working angles are increased.  Isn't the maximum working angle the point at which it starts to bind?
David French
Tree-hugging communist
1999 Discovery II TD5 Manual
Patriot roof rack, QT Services diff guards front & rear, DiscoParts steering guard[/url], Autologic ECU upgrade, 2" Old Man Emu lift, 235/85R16 BF Goodrich All Terrains, Safari snorkel, DiscoParts jackable sills, Warn Tabor 9000

Ex Disco 200TDI, P38a 4.6HSE and 101FC 6x6 Camper.  Africa Trip Blog

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #7 on: September 06, 2008, 18:28:33 »
David

What he is saying is a simple UJ working at an angle of say 10 degrees is still working at 10 degrees regardless of whether its a standard UJ which or wide angle UJ capable of working at 30 degrees. At a 10 angle the variations in speed and hence viberations are still the same.

To reduce the vibrations in a prop shaft 2 UJ should be paired, correctly phased and working at the same angle to cancel out the speed variations. In a standard setup this should be done by the UJ on each end of the propshaft, but on lifted and castor corrected setups the UJs end up working at different angles.
« Last Edit: September 06, 2008, 18:33:22 by clbarclay »
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline Eeyore

  • Posts: 2475
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #8 on: September 06, 2008, 18:39:29 »
Yep, Mr Barclay has it spot on.

Quick point of note though from reading the above:

A single hookes-type universal joint (two yokes, one cruciform) is a 'cardan joint'.
A shaft, with cardan joints at each end is a 'cardan shaft'.
A joint consisting of two close-coupled UJs is a 'Double-Cardan' joint.

Might make a difference if you're on the phone to someone.  ;)

That aside, Steve and RRB are correct with what they're saying - a wide-yoke shaft was not the solution to the problem - a DC shaft was.
Flower: '95 Defender 110 Hard Top. Donkey Power :D

Offline thermidorthelobster

  • Posts: 3557
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #9 on: September 06, 2008, 19:57:02 »
Thanks, Chris and Eeyore, it makes perfect sense now.  Nearly.

If I understand it right, the idea of a CV (Constant Velocity) joint is also to cancel out the speed changes, hence the name presumably.  Do they work in the same way?

And if you have a double-cardan joint (have I got this right?  The thing Chris describes) at ONE end of the shaft, and a normal UJ at the other end, surely you end up with the driven end of the shaft going in and out of phase with the driving end?  I'm thinking...  engine turning at constant speed, driving a double-cardan joint, so prop shaft turning at constant speed;  then prop shaft turns a UJ, which turns the diff, but as the UJ isn't giving constant rotational speed (ok, angular velocity) then the diff is going to be speeding up and slowing down all the time.  In which case doesn't it make more sense to have one at each end of the prop shaft?
David French
Tree-hugging communist
1999 Discovery II TD5 Manual
Patriot roof rack, QT Services diff guards front & rear, DiscoParts steering guard[/url], Autologic ECU upgrade, 2" Old Man Emu lift, 235/85R16 BF Goodrich All Terrains, Safari snorkel, DiscoParts jackable sills, Warn Tabor 9000

Ex Disco 200TDI, P38a 4.6HSE and 101FC 6x6 Camper.  Africa Trip Blog

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #10 on: September 07, 2008, 01:42:49 »
Due to the nature of the radius arm suspension on the front of a defender the working angle of the joint at the diff end of the front propshaft changes very little whilst the suspension moves up and down, where as the joint at the transphere box end of the proshaft changes a lot more for the same movement. Using a double cardon* joint cancels out the vibration from the changes at the transphere box end.

As you point out there is the potential for the joint at the diff end to cause vibrations as ther isn't another joint to canle out the speed variation. The reality though is that on a standard setup the working angle of this joint is relativerly small (particually after caster correction by rotating the whole axle) so the vibrations cause by this joint typically go unnoticed amoungst all the other background vibrations.


*or whatever you want to call it, micky mouse if you fancy :lol: its just a name, before getting into the 4x4 comunity I hadn't heard of cardon before, they were all refered to as UJs or Hooke joints. The beauty and complication of language.
« Last Edit: September 07, 2008, 01:49:12 by clbarclay »
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline Eeyore

  • Posts: 2475
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #11 on: September 07, 2008, 11:40:04 »

*or whatever you want to call it, micky mouse if you fancy :lol: its just a name, before getting into the 4x4 comunity I hadn't heard of cardon before, they were all refered to as UJs or Hooke joints. The beauty and complication of language.

I like the explanation  :cool:

And yeah, I know what you mean about the language thing. The key is to remember the difference between hookes/uj/ cardan and a double-cardan.
Flower: '95 Defender 110 Hard Top. Donkey Power :D

Offline thermidorthelobster

  • Posts: 3557
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #12 on: September 07, 2008, 14:53:01 »
So what do you call a prop shaft with a double-cardan at each end? :D
David French
Tree-hugging communist
1999 Discovery II TD5 Manual
Patriot roof rack, QT Services diff guards front & rear, DiscoParts steering guard[/url], Autologic ECU upgrade, 2" Old Man Emu lift, 235/85R16 BF Goodrich All Terrains, Safari snorkel, DiscoParts jackable sills, Warn Tabor 9000

Ex Disco 200TDI, P38a 4.6HSE and 101FC 6x6 Camper.  Africa Trip Blog

Offline Eeyore

  • Posts: 2475
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #13 on: September 07, 2008, 16:13:57 »
So what do you call a prop shaft with a double-cardan at each end? :D

Expensive!  :lol:
Flower: '95 Defender 110 Hard Top. Donkey Power :D

Offline muddyweb

  • Posts: 6382
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #14 on: September 07, 2008, 16:17:50 »
The only reason for not fitting the Disco II cardan prop is that it's a sealed unit with no grease nipples. If you start to use it often off-road it lasts about a year. Hence it's a false economy going for the cheaper Disco II one.

Cheers

Steve

Not the only reason... pretty sure it'd be the wrong length for an 07 Defender ;-)

There's a pro / con argument when it comes to sealed-for-life joints.   They are usually stronger than the greasable UJs...  they have bigger bearing journals, thrust pads and no grease-way inside to weaken the spider.    Greasable UJs are an advantage... provided they are greased...   A greasable UJ which doesn't get serviced regularly will often fail earlier than a sealed unit.    Sadly, many people don't seem to know what a grease gun looks like !
Tim Burt
Muddyweb
-------------------------------------------------------------------------------------------------------------------
www.muddyweb.com
-------------------------------------------------------------------------------------------------------------------

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #15 on: September 07, 2008, 18:33:40 »
So what do you call a prop shaft with a double-cardan at each end? :D

Expensive!  :lol:
I like the explanation :lol: far less likely less likely to get missunerstood than hooke or cardon etc.
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline scatt

  • Posts: 162
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #16 on: September 07, 2008, 19:47:53 »
WOW! thanks for all the info, it looks like i better get a double cardon  prop shaft sorted pronto :D. more bloody money  :cry:.
Will let you know how i get on with as soon as it comes back from LR.

Offline scatt

  • Posts: 162
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #17 on: September 12, 2008, 20:54:45 »
I now have a perfectly drivable defender, the double cardon prop was just the job :D :D :D :D.

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #18 on: September 13, 2008, 10:43:31 »
Hooray!
 :dance:
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

Offline land-def-90

  • Posts: 173
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #19 on: September 14, 2008, 22:40:00 »
as a mater of interest i recently bought a disco 2 double cardon prop from ebay it was advertised as having a new uj fitted when it arrived it had a new greasable uj at the double cardon end.....  :-k so that makes a disco 2 prop worth buying in my opinion cost me £80 as and when joints fail i will replace with greasable ones  :)

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #20 on: September 15, 2008, 11:25:01 »
Is there any identification of those new UJs so you (and others) know which make/model of UJ to get next time?
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline land-def-90

  • Posts: 173
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: which prop for lifted defender 2.4 tdci
« Reply #21 on: September 15, 2008, 20:34:43 »
Is there any identification of those new UJs so you (and others) know which make/model of UJ to get next time?
[/quo
te]i shall see if i can sort that out, to be honest i havnt a clue at moment but will find out asap

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal