AuthorTopic: disco redesign  (Read 46119 times)

0 Members and 1 Guest are viewing this topic.

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #30 on: April 21, 2008, 22:54:35 »
after looking at chequar plate rear door cover at 50 quid and unsure if i like it on the inside . i came up with this idea. all done for 15 quid  :D and loads of idea for extra space. ah good old 6mm mdf
« Last Edit: April 21, 2008, 22:57:21 by david p »

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #31 on: April 27, 2008, 18:14:50 »
made a tool chest/ storage box for the back and started the parcel shelf this weekend

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #32 on: May 03, 2008, 21:44:52 »
mud tyres on and winch freed up ready for new cable
« Last Edit: May 03, 2008, 21:48:20 by david p »

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
Re: re vamp time on the old motor
« Reply #33 on: May 03, 2008, 21:55:17 »
Looks like your gonna need to chop your arches
Those tyres look huge  :shock:
 :D
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #34 on: May 03, 2008, 21:58:20 »
yep devils pit 2moz sort that out a treat  :lol: . wicked holding on the road compared to grizzlys sounds like a tank going by  :lol: :lol:

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #35 on: May 04, 2008, 17:47:17 »
well after a short trip i can say the saw had to come out.  :doh: think im just getting lazy hoping it will fit ok  :-$ slap on the waist for me  :police: :lol: :lol:.

a 60mm body lift is getting more and more tempting once funds allow. dont fancy a d.i.y job somehow

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #36 on: May 10, 2008, 00:16:55 »
past week ive lowered the anti-roll mounts ,

fitted 2 6x9s with 18mm spacers in the parcel shelf ( order an extra 2 6x9s for extra bass ) amps in but not wired in yet.

main cherry bomb is coming off 2moz and straight through mid box on instead.
« Last Edit: May 10, 2008, 07:50:37 by david p »

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
Re: re vamp time on the old motor
« Reply #37 on: May 10, 2008, 09:59:43 »
Looksgood so far
Just make sure you secure your tool boxes down ;)
Other wise their gonna break your speakers and amp  :|
 :D
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #38 on: May 10, 2008, 14:55:15 »
gonna inclose all the underneath of the parcel shelf and use locking gas shocks on box and shelf

mentalmoshio sophs V8i

  • Guest
Re: re vamp time on the old motor
« Reply #39 on: May 11, 2008, 16:45:42 »
well i can say the exhuast bolts are going to need a lot of wd40 mange a 1/2 turn and that was it all weekend . still did get second 6x9 in . also reweld exhuast back pipe

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #40 on: May 13, 2008, 21:42:59 »
got the cold air pipe to on tonite ( yes it is a snorkel i know ) 2 foot is deep enough for my liking.

spade holder a working progress

Offline mobi

  • Posts: 291
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: re vamp time on the old motor
« Reply #41 on: May 14, 2008, 06:52:07 »
after looking at chequar plate rear door cover at 50 quid and unsure if i like it on the inside . i came up with this idea. all done for 15 quid  :D and loads of idea for extra space. ah good old 6mm mdf

i got a chequar plate rear door, but it's black powder coated, it looks ok.

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #42 on: May 15, 2008, 19:23:47 »
where do u get this rear chequer plate from?

Offline lee celtic

  • Regional Rep
  • *
  • Posts: 2680
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: out with the old and in new stuff
« Reply #43 on: May 15, 2008, 19:35:09 »
you can buy sheets of any thickness from a company calld AAlco then just cut it up with a jig saw .

I'm ordering a 2mm sheet to do my lower doors rear door and bonet.

then any bits that are left will do bits and bobs ...
so many hills , so little time ....
discovery TD5
work in progress...lol

Offline boss

  • Posts: 1634
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-0
  • "steerings a little loose!"
  • Referrals: 0
Re: out with the old and in new stuff
« Reply #44 on: May 15, 2008, 21:05:18 »
atlast a propper thread mate, none of that disco side looks <edit>!
diddnt read all of the thread, have you put stronger shafts in the axels? because that simex pattern is famous for claiming diffs and shafts
« Last Edit: May 15, 2008, 21:33:27 by Paul »

"the young disco chopping maniac" -disco_stu!
www.artoffroad.com

bossFAB - stickers avalable

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #45 on: May 15, 2008, 22:28:07 »
nope still 10 spline and a serious yank forward last week now i mite be regreting in the future  :doh: :doh:

considering diff swap in the future. till then a case of less revs and no turning with diff lock in

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #46 on: May 16, 2008, 20:49:42 »
just fitted neon sidelights and made the back light not work  :doh: :doh: :doh: a large hammer was at hand luckly the fuse was closer :lol: :lol: :lol:

had a quick check on mpg early today  :oops: 6.5 mpg  :doh: :doh: :doh: mr brown did u hear that wont u want to up fuel prices a bit more u total c ...



« Last Edit: May 16, 2008, 23:19:25 by david p »

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #47 on: May 17, 2008, 14:46:45 »
anyone going to farley quarry / nash farm or devils pit 2moz?

mite see ya there undecided on site yet

anyway after knacking the welder mid week didnt get the chance to change the wheel carrier mount around :doh: :doh:. however the series 2 project ( on hold for now its a mega rebuild job now  :doh:) came up with a rear door carrier.

just bolted it to the roof rack for now . now thinking it would be ideal plate for wheel carrier on the back door at a later date

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #48 on: May 17, 2008, 17:29:29 »
just made a rear spade holder for the back may use the roof idea for some thing else

nuff special to make roughly 75cm of 30by6mm flat bar and 4 bolts 2 m10 bolts and 2 m1o wing nuts

im gonna have to make a rear roof light guard . every time i lift something up there the lights take a knock or too. :-k
« Last Edit: May 17, 2008, 17:36:55 by david p »

Offline clover

  • Posts: 550
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Clover
  • Referrals: 0
Re: out with the old and in new stuff
« Reply #49 on: May 17, 2008, 17:43:23 »
where do u get this rear chequer plate from?

David p that is a unique looking Disco... Where did you get those window guards?

Can they be fitted on the inside as well as the outside? :evil:

1996 Discovery 300TDi Affectionately known as Clover. 
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones,  adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch,  A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #50 on: May 17, 2008, 17:54:18 »
things to come

16 speaker stero with updated stero ( 8 at the moment )

bucket seats fitted

4 point harness

rear load protection

after market steering wheel

tank guard

wheel spacer ( when funds allow )

late model mirrors

tinted windows

wind gaurds

revise exhuast system

hid conversion

possibly bits to buy

stage 2 superchipped

body lift

rear tubular winch bumper

diff swap

wheel arch flares



mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #51 on: May 17, 2008, 20:08:16 »
discopinky aint on mine yet  :D gonna make mine i think u can buy them from here

http://www.mobilestoragesystems.fsnet.co.uk/otherproducts.htm

Offline lee celtic

  • Regional Rep
  • *
  • Posts: 2680
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: out with the old and in new stuff
« Reply #52 on: May 17, 2008, 21:06:02 »
I like the idea of being able to kick though the windows to get in/out if needed don't think I'd like driving a trap [-X
so many hills , so little time ....
discovery TD5
work in progress...lol

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #53 on: May 17, 2008, 22:14:05 »
u have a very good point there lee. im just wonder about the new laws on stuff like this a heard a few the last few weeks unsure if there true or not

it regards towbar, rollcages, number plate height and a few other things too  :shock: that even more to think about

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #54 on: May 18, 2008, 00:27:55 »
see ya at whaddon laterz folks if ur going  :afro: :dance:
« Last Edit: May 18, 2008, 21:06:26 by david p »

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #55 on: May 18, 2008, 21:01:41 »
whaddon rules good to see team choas there gr8 day on broke tank guard  :doh: and reshaped the back archs with the tyres  :doh:

Offline stuvy

  • Posts: 410
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: out with the old and in new stuff
« Reply #56 on: May 19, 2008, 22:22:10 »
i was just scrolling down to say your gonna muller your tyres and rear arches for sure! was it wet at whaddon?
Epsom green Discovery S1, 33" M/T on colour coded rims, 2" Lift Kit, Steering Gaurd with raised steering bars, Rock+Tree sliders, Modded front bumper, Checker plate.

--------------------------------------------------------------------------------------------------------------
 www.DrewsSpeedShop.co.uk

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #57 on: May 20, 2008, 21:38:39 »
yes i can say the rear arch is on the list to do , yep quite wet in places and a few dry hard spots to at whaddon

mentalmoshio sophs V8i

  • Guest
Re: out with the old and in new stuff
« Reply #58 on: May 20, 2008, 21:46:27 »
fixed the tank gaurd on the n/s and removed the inner arch unsure to buy flares or not?

did jack the back up give by an extra 60mm to see what the offset would be like without flares
« Last Edit: May 20, 2008, 21:52:23 by david p »

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
Re: out with the old and in new stuff
« Reply #59 on: May 21, 2008, 07:38:45 »
nope still 10 spline and a serious yank forward last week now i mite be regreting in the future  :doh: :doh:

considering diff swap in the future. till then a case of less revs and no turning with diff lock in

you only have a centre difflock so if you disengage that when turning you will prob get stuck........
Unless you have managed to sneak in a set of ARBs & not told anyone  :lol:
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal