AuthorTopic: 110 /90 wheels  (Read 3918 times)

0 Members and 1 Guest are viewing this topic.

Offline novaman

  • Posts: 2
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« on: February 11, 2007, 16:11:54 »
90 /110 wheels will they fit  range rover classic tell me what mod if reqiured

                                            cheers                :?:  :)

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
110 /90 wheels
« Reply #1 on: February 11, 2007, 16:37:50 »
the wheels themselves fit straight on,D'pends on what tyre size you plan on running though
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


Offline novaman

  • Posts: 2
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
help
« Reply #2 on: February 11, 2007, 17:05:43 »
ive just tried they wont just go on hub slightly to big   :?:
tyres  235/85  r16  120/116 p    :?:

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #3 on: February 11, 2007, 21:21:14 »
That's odd :?  I've seen them used before and the Defender is basically a rework of Range Rover underpinnings.

But why do you want to use steels? those tyres will fit on the Vogue 3 spokes or Disco steels.  I have a set of 5 btw, 3 of them brand new.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline buster uk

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #4 on: February 15, 2007, 18:59:34 »
im running 235 85 16's on standard range rover 3 spokes,but i do have a 2" lift.No rubbing,no arch trimming,just adjustment of the steering lock stops.
1994 Range Rover Classic 3.9 v8 vogue se

Offline Range Rover Ron

  • Posts: 460
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • Bebington, Wirral.
  • Referrals: 0
Wheels
« Reply #5 on: February 16, 2007, 17:44:47 »
Hello there,

I'll agree with the above, why do you want steel wheels on your RRC?
Three spoke alloys are cheap and very plentiful.
Then again it's what ever rocks you boat.

The 110/90 wheels shoud however fit striaght on to the RRC.
I have heard of people filing out a little bit of ally when fitting alloys to differing Land Rover vehicles but never heard of a problem with steels.

My RRC is running on 235/85/16's with Mach5's.
I've a 2" lift and had the wheel arches trimmed to fit fibreglass extensions to the arches.

If there is a definate problem you may try reaming out the bolt-holes by about 1mm, but it depends on how they "wont fit".

Cheers..................
Ronnie Wood, LLROC

Suicide:- a permanent sollution to a temporary problem!

ONE LIFE. LIVE IT.

Offline Angry Badger

  • Posts: 14
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #6 on: February 18, 2007, 17:36:38 »
I've got landie forward control rims on mine and have no problems with fitting.  For pics check my photos
I do all my own stunts....
'89 Rangie Bobtail
3" Lift
Fwd Control rims
33" tyres
Detroit Lockers both ends
...And now a P38 4.0 v8

Offline iluvmud

  • Posts: 81
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #7 on: February 18, 2007, 18:50:49 »
My wheels came straight off a 90 and had no props fitting my rrc :?

The tyres are 235/85/16s on it i have a 2" lift and only mod i had to make was trimming the front splash guards (across front of rim)

Offline Littledan

  • Posts: 3003
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #8 on: February 18, 2007, 20:55:01 »
my dad has dicso wheels on his and i have offten seen the disco wheels on defenders and stuff!

dan
[size=9]Dan[/size]

Offline DAVE39V8

  • Posts: 90
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
arch trimming??
« Reply #9 on: February 24, 2007, 03:36:02 »
Hi iluvmud i have identical wheels to yours but my tyres are coming straight from my 3 spoke vogue alloys..The size of the tyres are 235x70x16..My rangie has air suspension..Would these go straight on without wheel arch mods.. :?
Also i like your snorkel...I want one...
1994 Range Rover Vogue SE 3.9 V8i LPG.
1998 Rover 800 Vitesse Coupe Turbo.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #10 on: February 24, 2007, 11:44:05 »
235/70 shouldn't catch the arches, mine don't but you do need to check they will fit when the EAS relaxes and hits the bump stops.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline DAVE39V8

  • Posts: 90
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #11 on: February 24, 2007, 19:17:37 »
the only thing thats started to happen is when the car is sat idle for a day or two the n/s drops lower than the o/s and the tyres go up into the arches...
the front goes down first then gradually the rear...thats what worries me about fitting these wheels at the mo..any ideas what it could be..once you start up and drive the EAS works ok..
1994 Range Rover Vogue SE 3.9 V8i LPG.
1998 Rover 800 Vitesse Coupe Turbo.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #12 on: February 24, 2007, 22:29:05 »
If the tyres are going into the arches check you still have bump stops, they are special to the EAS and cannot be replaced by normal ones.

It shouldn't end up leaning to one side unless there is a problem, the EAS self-levels every few hours when parked, again unbless it's going onto the bumnps and one is missing.

The front end will always be lower than the back, the back goes up first and comes down last.  So that the headllights never dazzle, so it's working fine.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #13 on: February 24, 2007, 22:30:42 »
Oh, one thing with EAS, I've found the dampers being sold as Woodhead or OEM parts are longer than they should be, according to Pro-Comp and I find they are too long for the airbag, it's possible to blow the airbag apart if the damper doesn't stop it's downward movement.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline buster uk

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: arch trimming??
« Reply #14 on: February 25, 2007, 09:04:43 »
Quote from: "DAVE_RRV8"
Hi iluvmud i have identical wheels to yours but my tyres are coming straight from my 3 spoke vogue alloys..The size of the tyres are 235x70x16..My rangie has air suspension..Would these go straight on without wheel arch mods.. :?
Also i like your snorkel...I want one...


Well i fitted 235 85 16's and when i had air suspension ,they would sit right up in the arches when parked (suspension deflated).They fit,but did rub slightly when at normal ride height.
There ok now i've gone to coils at +2"
1994 Range Rover Classic 3.9 v8 vogue se

Offline DAVE39V8

  • Posts: 90
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #15 on: February 25, 2007, 19:22:03 »
ok guys thanks for all your help..will check if there is a bump stop gone awol and check air bag condition before i fit the rims.. :D
1994 Range Rover Vogue SE 3.9 V8i LPG.
1998 Rover 800 Vitesse Coupe Turbo.

ben_haynes

  • Guest
110 /90 wheels
« Reply #16 on: February 25, 2007, 19:36:31 »
i have a set of series/defender rims on my rangie and a set of 8 spokes on the disco which i had on my old series and they came of 110

so they will fit

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #17 on: February 26, 2007, 17:39:20 »
If you find they rub a little at standard height you can reprogram the EAS to give you a little bit more daylight under the car.  I'd also advise dispensing with low profile.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline buster uk

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #18 on: February 26, 2007, 18:01:28 »
Quote from: "Range Rover Blues"
If you find they rub a little at standard height you can reprogram the EAS to give you a little bit more daylight under the car.  I'd also advise dispensing with low profile.


I didnt know that.Some times i wish i still had the air suspension  :(
1994 Range Rover Classic 3.9 v8 vogue se

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline buster uk

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #20 on: February 26, 2007, 18:12:09 »
Lol,
thanks  :shock:

Looks like a good kit,how much was it ?
1994 Range Rover Classic 3.9 v8 vogue se

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #21 on: February 26, 2007, 18:37:45 »
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline DAVE39V8

  • Posts: 90
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #22 on: February 26, 2007, 22:24:11 »
--------------------------------------------------------------------------------
 whats the main reason for regretting losing your air suspension buster uk?does having springs make it roll alot more on corners etc or unstable..
1994 Range Rover Vogue SE 3.9 V8i LPG.
1998 Rover 800 Vitesse Coupe Turbo.

Offline buster uk

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #23 on: February 27, 2007, 08:35:51 »
Quote from: "DAVE_RRV8"
--------------------------------------------------------------------------------
 whats the main reason for regretting losing your air suspension buster uk?does having springs make it roll alot more on corners etc or unstable..


Well,i do and i dont regret it.

The springs are cheap and reliable.Better axle travel.(as i regularly use it offroad).I fitted a 2" lift kit with new springs and dampers.
When driving on the road it wallows about more,also the steering self centering isn't very good.Also i had to remove my rear anti roll bar as i kept twisting the links badly.I fitted 2" alloy blocks to the mounts but still twisted the anti roll bar links and damaged them.Got sick of replacing them so i just binned it.
I miss the air suspension because at the touch of a button i could get a 2" lift when off road and it was stable on road and over 56 mph (i think) it lowers it more so its even more stable.I find that anything over 60mph on motorway the car gets blown about and wanders about more,but this maybe because of the 2" lift,not because its on springs.
Also the great thing about the air suspension is you can pile a heavy load in the boot and she levels up nice !
My airbags were shot,so if i had replaced them it would have been ok,but then again i did a 2" lift with dampers for less money than 4 new airbags and because i uses it offroad a lot i wanted the reliability of the coils.
If you dont use it too much off road i would keep the air suspension.

cheers
andy
1994 Range Rover Classic 3.9 v8 vogue se

Offline DAVE39V8

  • Posts: 90
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
110 /90 wheels
« Reply #24 on: February 27, 2007, 19:32:45 »
yeah i had a feeling thats what it would feel like with springs..i like the air suspension in the ways you stated too..i do go off roading once a month..due to this i have just sussed out why it leans on the front corner when stationary......the air bag is in need of changing..so will have to change that first before i change wheels..but think i will stick to eas..for the stability on road more than anything else..

many thanks again
dave
1994 Range Rover Vogue SE 3.9 V8i LPG.
1998 Rover 800 Vitesse Coupe Turbo.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
110 /90 wheels
« Reply #25 on: February 28, 2007, 13:32:17 »
Well you can re-bladder your existing springs cheaper than replacing them, unfortunately the classic springs are more expensive new than the P38 ones.  If you have a spare £400 or so you can get a set like mine.  I added plus 2" shocks, I can't go any longer because the back shocks are almost fully closed when at access height so longer shocks would get damaged and damage the car too.  I still need to space out my rear ARB which is a big thing due to the size of the V8 up front.

I don't drive this one off-road, that's what Blue is for, the LSE is for my caravan.  On air it tow really stable, a bit too good if anything.  I towed another LSE back from Leicester a month of so ago and when I set off it wasn't loaded quite right and started to weave at 40mph.  I couldn't tell :o

I stopped and pumped the trailer tyres up really hard and move the car forewards on the trailer, the LSE likes a lot of noseweight it seems.  Started the engine and the back end came up to normal height, made it home without further incident.

I'ma  big fan of EAS but look at how much cash I've thrown at it to get it this good and I can fully understand why people go for coils.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal