AuthorTopic: 'Lectric Spaghetti  (Read 1055 times)

0 Members and 1 Guest are viewing this topic.

Offline rangerider

  • Posts: 228
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« on: July 23, 2006, 16:49:47 »
Any of you folks out there know what stereo wires go where on J plate ?

Got the acc switched feed, but have no idea about all the speaker wires, which colour goes where?

Only really worried about the front speakers. Not worried about powered ariels etc.

tia
Hela - Disco 200TDi, Still stock for now but watch this space.......
+ 1 battlescar

I lurv the smell of mud in the mornin'

Offline bullfrog

  • Posts: 1009
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #1 on: July 23, 2006, 17:08:54 »
Dont know but you could just try untill you match stereo to speakers :idea:

Offline gtomo2

  • Posts: 1924
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #2 on: July 23, 2006, 17:25:51 »
get a meter and check each wire you should get about 4 ohms between a specker + and -
Mr Graeme Thomas (tomo)
300 TDi Discovery - So i can go fording
Stop laughing put the camera down AND PASS ME THE TOW ROPE !! PLEASE

Offline rangerider

  • Posts: 228
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #3 on: July 23, 2006, 17:58:10 »
yeah, but 4 speakers = 8 wires, and then theres figuring out just where in the motor said speaker is. there are 24 different ways of wiring up 4 speakers :( the missus has enough trouble with the stereo without the FR speaker actually being connected to the RL output etc :)
Hela - Disco 200TDi, Still stock for now but watch this space.......
+ 1 battlescar

I lurv the smell of mud in the mornin'

Offline gtomo2

  • Posts: 1924
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #4 on: July 23, 2006, 18:09:35 »
true undo the front speakers and see what colour wires are connected to them should be the same colour at the radio end :wink:
Mr Graeme Thomas (tomo)
300 TDi Discovery - So i can go fording
Stop laughing put the camera down AND PASS ME THE TOW ROPE !! PLEASE

Offline rangerider

  • Posts: 228
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #5 on: July 23, 2006, 18:18:35 »
did that, but aftermarket speakers has resulted in black & black/white on all 4 speakers, and goodness knows what else actually in the console :(
Cant even see where the splices are unless I start pulling trim off everywhere.


guess its off to the motor factors in the morning for a powerprobe.
Hela - Disco 200TDi, Still stock for now but watch this space.......
+ 1 battlescar

I lurv the smell of mud in the mornin'

Offline gtomo2

  • Posts: 1924
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #6 on: July 23, 2006, 18:45:44 »
yea that will be fun to do. pop down to halfod and have a look through a hayes manual at the wiring diagrams and make a note of the colour codes for the speaker wires. cheaper that going to a stealship. or ask halfords to fit it for you should still be cheaper.
Mr Graeme Thomas (tomo)
300 TDi Discovery - So i can go fording
Stop laughing put the camera down AND PASS ME THE TOW ROPE !! PLEASE

Offline burgerman

  • Posts: 1027
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
'Lectric Spaghetti
« Reply #7 on: July 23, 2006, 18:52:49 »
USE A TRIPLE A BATTERY, THE 1.5 VOLT TYPE, AND BUZZ THE WIRES OUT WITH THEM    , WHEN A CONNECTION IS MADE A CLICK IS HEARD FROM THE SPEAKER,   I HAVE DONE THIS MANY TIMES ON EXPENSIVE SPEAKERS/SYSTEMS NO WORRIES,   GODD LUCK,     ONLY TRY THIS ON SPEAKER WIRES ,, NOT POWER WIRES!!!!!
TD5 with a few Tweaks ;o)
a bit more fuel friendly than the V8

Offline rangerider

  • Posts: 228
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
'Lectric Spaghetti
« Reply #8 on: July 23, 2006, 19:45:07 »
sssshhhhhhh!!!

told swmbo i need a power probe to do that :)


halfrauds "technicians" wont touch my truck even if would let them, its got nothing made by ripspeed on it :)

as for cheap???? my local charges 3 quid to fit wiper blades!!!! never mind extending a cut loom to fit a stereo they didnt supply
Hela - Disco 200TDi, Still stock for now but watch this space.......
+ 1 battlescar

I lurv the smell of mud in the mornin'

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
LECKY PROBS
« Reply #9 on: July 24, 2006, 05:11:16 »
Spot on Burgerman-AA or AAA battery will do it.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal