Main Portal Page information Forums shopping Live Chat Member List Childrens Area
www.mud-club.com
July 30, 2010, 15:47:52 *
Welcome, Guest. Please login or register.

Login with username, password and session length
Home Help Search Calendar Login Register
Pages: [1]   Go Down
Print
Author Topic: vauxhall astra estate.. cv joint ??  (Read 212 times)
0 Members and 1 Guest are viewing this topic.
stretchy

Member Number :11456
Offline Offline

Gender: Male
Age: 26
Location: birmingham
Posts: 372



StretchyBoyBeech
« on: March 03, 2010, 16:49:19 »

alright guys. got an old astra that is noking a bit round corners and also sounds like a slight bit of grinding and steerinig wobble. i have jacked it up and had a look but i know nothing about cars. the cv joint boot looks in good condition and i cant feel any play in anything els. any ideas?? the mots up soon so was hoping to get it to pass as the engine looks fresh. can i do the cv joint myself ??

stretchy
Logged

All the Gear, No Idea!

I break land rovers!
07716989933
chunk84

Member Number :12510
Offline Offline

Gender: Male
Age: 26
Location: staffordshire
Posts: 30


anthony hayward
« Reply #1 on: March 04, 2010, 06:57:53 »

yes mate doin a cv on a astra is easy all ya have to do is undo the lower arm,big castle nut,etc then just pull the whole drive shaft out then peel the cv gaiter back and the will be a circlip in the center of the cv its self then should slide of with a bit of force
Logged

300 tdi disco egr removed and boost turned up ,5 inch lift ,steering guard ,trantula steering armswith pro comp shock , extended arches,33x12.50x15 cooper stt on silver mods ,front and rear diff gaurds,axel breathers ,snorkel and a winchbumper with 9000lb super winch
stretchy

Member Number :11456
Offline Offline

Gender: Male
Age: 26
Location: birmingham
Posts: 372



StretchyBoyBeech
« Reply #2 on: March 04, 2010, 11:47:54 »


thanks mate

any ideas how I can defanatly check its the cv thats clonking??
also how much are a cv joint normaly ??

thanks

stretchy
Logged

All the Gear, No Idea!

I break land rovers!
07716989933
Jay_disco

Member Number :12750
Offline Offline

Gender: Male
Age: 27
Location: wednesbury west midlands
Posts: 51


To Infinity And Beyond!


« Reply #3 on: March 04, 2010, 18:22:56 »

cv joints are quite cheap to be honest mate. either look on ebay or if you want to do it real cheap get one from a scrap yard. just remember to put plenty of grease in the cv. once you have changed that put the steering on full lock then drive it in a complete circle while accelerating. then go full lock the opposite direction and do the same. if there is noise your fixed. as for wheel wobble, could be a few things....wheel bearing id say if you was getting a grinding noise too. other than that maybe a track rod end worn or any of the other bushes located around that section.
Logged
Pages: [1]   Go Up
Print
Jump to:  

This is a Carbon Neutral website - you should COCO
Powered by MySQL Powered by PHP Theme by m3talc0re.com | Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!